The Ultimate Guide to Internet Bonding for Live Streaming
Bonding is a unique solution for virtual conference livestreaming on the internet. It enables broadcasters to stream events of any size or location without relying on a cable internet connection. It provides the necessary range, speed and quality for professional video streaming.
It’s like tethering but instead of just one SIM card you are combining multiple ‘nodes’ to form one powerful, consistent internet connection.
How does internet bonding work?
Bonding internet systems work by connecting to a number of modems, which in turn are connected to antennas that provide them with the signal. The more modems that are connected, the faster the connection and the more livestreaming bandwidth there is available. However, there is a limit to how many modems can be connected. For 3G, this is six; for 4G it is eight and for LTE it is ten (as of 2021).
The system is set up so that the connection to each node can be independently on or off. When all the connections are turned off, there is no data coming in. When they are all turned on, the maximum data is received.
When you watch a video on YouTube, only a small amount of data is required. This means that when you have a strong connection, it is able to play without interruption. However, if your connection starts to weaken, the video will start to stutter and stop until enough data is able to make it through to keep it running smoothly.
The idea behind bonding is to always have a strong and consistent connection. If one modem starts to lose signal, others can take over. The system will also automatically choose the best performing modems to maximize the speed of the connection.
The system also allows you to choose which node you connect to. If you are close to one in a certain location, then you will get a stronger signal and thus a faster connection. You can also use the system to create a backup connection in case your main one fails.
Because bonding uses multiple connections, it is more likely to suffer from congestion than other types of connections. However, the traffic management system enables you to prioritize different types of data so that latency-sensitive activities such as voice communications or video streaming are not negatively affected.
Bonding can also be integrated with existing hardware and software systems so that it is not necessary to replace existing equipment.
It is also possible to connect multiple nodes together to create a truly unlimited and reliable wireless backhaul solution. This can be done locally or over long distances, depending on need and location.
You can also use the system to transmit data other than internet, such as video or voice communications. This gives you a versatile and reliable way of transporting data between locations.
A common use of the system is to provide a back-up for existing Wi-Fi connections. If the main signal starts to fail, Bond will take over and keep everything working without any interruption.
Another advantage of using a bonding system is that it is able to make use of different types of network connections. This could be 4G, 3G or even Wi-Fi, allowing it to provide coverage over a wide area.
The state of internet in Australian cities
Australia’s geographic location is challenging when it comes to internet connectivity due to it being one of the last countries at the end of the Pacific network of undersea data cables. Its expansive landmass is another obstacle in ensuring the population gets consistently good quality internet. If you’re not located in New South Wales or Victoria then your interest will be 2nd class at best.
This is the reason why bonding is very relevant to Australians who need to livestream
The National Broadband Network is a large scale project that was designed to revolutionize internet access in Australia. It is based on the idea of fibre to the premises, which would provide the whole country with much faster internet speeds than are currently available.
This ambitious plan has been hit by a number of delays and cost overruns, meaning that it is still not complete. As a result, some Australian cities have better internet than others.
The good news is that if you happen to be in one of the cities that already has access to the NBN, then you are able to enjoy much faster speeds. In fact, the maximum speeds are up to 100 times faster than traditional broadband.
This makes it possible to do things like streaming high definition video without any loss of quality or delays. It also means that games are much smoother and more enjoyable.
If you aren’t in a city that has access to the NBN, then you will need to put up with slower speeds until the NBN does come to your area.
The NBN is steadily being rolled out across the country and slowly but surely, access to faster internet is becoming a reality for more and more people. However, while plans are in place to connect all cities to the NBN by 2023, some places are going to have to wait longer than others, and that could be up to five years in some cases.
As we have discussed, the NBN plans to use fibre optics to provide internet access to homes and businesses. Fibre optics use strands of glass to transmit data, which means that they are able to carry much more information than traditional copper or cable connections.
It is also capable of providing much faster speeds. The NBN hopes to provide speeds of up to 1000Mbps through the use of fibre optics, although most households are only likely to get half of that speed due to the limits of current technology.
While this is all great in theory, the reality has been very different. The NBN has come under fire for its poor management and lack of preparation. They were not expecting as many people to want access to the NBN as there are currently waiting for it, which has led to an undersupply of equipment and slower than expected rollout plans.
This means that people who want fast internet are going to have to wait a long time before they get it. In fact, there are entire cities that are not scheduled to be connected to the NBN until 2023 or later.
If you are in one of those cities, your only option for faster internet speeds is to use wireless internet. You can do this either by connecting to a wireless signal in your area or hooking up a satellite dish to your connection.
You may have seen outdoor antennas mounted on the roofs of some houses in your area. These are satellite dishes, and they can be used to access wireless signals.
The only issue with this is that the dishes themselves can be very expensive and you may need a technician to come out to your house to set it up for you. If you live in an apartment, you will likely not be able to install a dish at all.
This leads on to the next point about why depending on WifFi in conference centres in Australia should be avoided at all costs.
Why bonding is smarter than paid hotel and conference hall internet access
Most hotels and conference halls offer premium WiFi access for conferences but with a catch–they charge a fortune for access. There’s also no guarantee that the connection will be good enough for your live stream event in the first place and you’ll be forced to pay into their monopoly before you find out.
Imagine being all set to go live any minute and then discovering that the hotel’s premium internet connection that you paid a few hundred dollars for is slow and stuttery. This is why it’s critical for any live streaming professional to have a portable bonding solution at hand.
That’s why you must be ready to use internet bonding to live stream in conference venues.
Top 3 internet bonding providers with Australian servers
Teradek Bond allows broadcasters to deploy their own customized Live Streaming solution. The company offers both standalone products as well as integrated solutions for cable operators and other content providers.
The company was founded in 2007 by two former Cisco Systems engineers, Jeff Koehler and Mark Pendergrast. They have developed a unique approach to live streaming that uses multiple modems to create a single Internet connection. This enables them to provide superior performance while minimizing latency and bandwidth consumption.
The company’s first product was a hardware encoder/decoder. The box, which looks like a cable modem, converts analog video signals to digital and sends them over the Internet. A companion product is the Bond Router, a video-processing card that attaches to a computer to receive the encoded signal from the Bond box and transmit it over the Internet.
The company has also developed a software encoder to work with webcams, DSLR cameras, and other video sources.
The Teradek Bond system uses multiple cellular modems to create a single, always-on connection. The solution has been used by media companies for events such as the 2008 Summer Olympics, the 2010 Winter Olympics, and the 2012 Summer Olympics.
Speedify is the DIY home provider of the 3 picks–a fast, versatile and innovative VPN that’s great for streaming
A strong focus on privacy with blistering speeds, Speedify is an American VPN that is quickly gaining recognition thanks to its innovative approach towards a problem that affects all VPN users: speed loss.
Normally, when you have a VPN enabled, your internet connection will try to route traffic through this secure tunnel. To do this, it has to disconnect from your WiFi network and then reconnect again once the VPN connection has been established.
For most people, this won’t really cause much of a problem. After all, most home connections are usually way faster than the fastest cellular data connections or even Public WIFI networks. However, if you’re someone who plays online games using a smartphone or a portable gaming system such as a Nintendo Switch, then there is a good chance that your gaming experience will be severely hampered by the time it takes to establish a VPN connection.
This is where channel-bonding comes in really handy. Instead of just connecting to one WiFi network or one 4G LTE connection, Speedify will try to connect you to multiple connections at the same time.
This way, there is no delay in establishing a VPN connection because your device is already connected to the internet through multiple mediums.
In practice, this results in a massive increase in download and upload speeds, making Speedify great not only for privacy but also for gaming.
Speedify is the choice for the home user who dabbles in live streaming but also requires a VPN as well as a bonding solution.
Mushroom Networks sits at the upper end of the quality range of the 3 picks. Based in San Diego, California, Mushroom provides a number of high-end software and hardware solutions for the most serious live-streaming professionals.
Their products include:
Mushroom’s flagship bonding solution, Truffle, is a fully managed service, so you don’t need to worry about ongoing management or performance, or the addition or deletion of carriers. Also, Truffle’s integrated security capabilities ensure that your customer traffic flows are protected from DDoS attacks as well as malicious users at your network edge. You can also use Truffle as a VPN concentrator, which allows you to extend your VPN tunnels beyond the limits of your VPN devices.
Truffle is available in both 1RU and 2RU appliance form factors. The appliances come fully configured with a variety of service provider connections. All that is required is for you to connect it to your network and power, and you’re ready to go.
- Bonds up to 16 connections of varying types
- Simplified management of multiple WAN connections
- Automatic failover to best WAN connection
- Integrated security services for all customer facing outbound traffic
- Proactive, automatic bandwidth balancing between all available WAN connections
- Increase network uptime and reduce business impact due to WAN outages
- Decrease in the costs of your WAN services
- Centralized management of all your WAN connections from one interface
- Ability to add or remove WAN connections at any time without interrupting service
- Eliminate the need to manage individual service level agreements with each of your service providers
- Ability to take advantage of the best prices and terms available from all of your WAN connections
- Get the most out of your existing bandwidth
Similar to Truffle, Portabella is another bonding product that combines up to 8 SIM nodes at the same time. Unlike the more expansive Truffle, Portabella is built with only live streaming in mind and can come with the optional Streamer Pro add-on that further optimises its performance for this purpose, as well as giving you insight into the viewing habits of your customers with real time statistics on what content they are watching and when.